Zaxcom Nomad Spécifications télécharger pdf (Page 73)

Zaxcom Nomad User’s Manual Syncing to a Denecke Slate

Syncing Nomad to a Denecke Slate

The LTC stream out of the Nomad has a “jitter” in the TC signal at 29.97 fps and 23.976 fps. This can result in the

Denecke TS-C or the TS-3 slates identifying the wrong code, if you set the slate to “Auto Set” (position 5). In

addition, if you use “Auto Set” you will experience a TC drift.

You don’t need to replace your slates. The Denecke Slate and Nomad can sync perfectly.

When setting the slate to receive timecode at 29.97 or 23.976, do not use the auto set. Just simply set the

rotary dial to the corresponding TC frame rate. When you sync the slate you will see “Sync Err” message in the

slate. Simply ignore it. The slate will accept the sync and the slate and Nomad will stay in perfect sync with each

other.

1 2 ... 68 69 70 71 72 73 74 75 76 77 78 79 80 81

Pas de commentaire

Zaxcom Nomad Spécifications Page 73