Zaxcom Nomad Manuel d'utilisateur télécharger pdf (Page 42)

MAIN MENU Auto-Mixer

Auto-Mixer – Not available in Nomad Lite

A-Mix Mode

Enables Nomads Auto-Mixer and sets if the Auto-Mixer will work pre-fade or post-fade.

• Pre-Fade - The Auto-Mixer is inserted before the faders in the audio chain so only the trim control will

affect the microphone levels. Since the Auto-Mixer is before the faders the faders have no effect on the

Auto-Mix levels.

• Post-Fade - The Auto-Mixer is inserted after the faders in the audio chain and both the trim and the faders

will control the levels of the microphones. In post-fade mode you can pull a microphone out of the mix by

lowering the fader and will keeping pre-fade iso tracks un affected.

Mic On Threshold

Sets the level that a microphone needs to be reached before that microphone opens.

When a speaker’s microphone reaches the mic on threshold level, as indicated on the input meter, that

microphone will open and become part of the mix.

• Mic On Threshold can be set anywhere between -60dB and -10dB

Attack

Sets how fast the microphone ramps up to full level when a speaker starts to talk. The microphone will

engage immediately regardless of the attack setting.

• Attack can be set anywhere between 1 and 150 ms

Decay

Sets how long a microphone will stay active after the signal has fallen 10dB below the mic on threshold.

• Decay can be set anywhere between 1 and 150 ms

Noise Reduction

Sets how much the noise floor is attenuated when no one is talking.

• Noise Reduction can be set anywhere between 0dB and -10dB

Attenuation

Sets how much each microphone is attenuated when a person stops talking.

When a person stops talking that microphone is not closed but the microphone is actually attenuated.

That level of attenuation is adjustable here. In some environments it may be more palatable to hear some

or most of the ambient microphone noise all the time rather than hear the noise mute and then re-appear

when someone talks. Regardless of this setting the last active microphone will always remain open. If you

want the microphone to close you can set the lower the attenuation.

• Attenuation can be set between -10dB and -80dB

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 89 90

Pas de commentaire

Zaxcom Nomad Manuel d'utilisateur Page 42