Zaxcom Nomad Manuel d'utilisateur télécharger pdf (Page 85)

Zaxcom Nomad User’s Manual Updating Firmware

Updating Firmware

Each Nomad is shipped with the latest firmware version installed. When newer firmware becomes available, it can

be downloaded from the Zaxcom website:

http://www.zaxcom.com/software-updates

Newer version

of beta software may be found on the Zaxcom Forums: http://www.zaxcom.com/forum

Upgrading the Firmware

1. Format a compact flash card using a PC or Mac.

2. Using a PC or Mac download the new software named (NomadProgFile_vX.XX.bin) and copy it to the card.

3. Insure that a set of fully charged batteries are installed or a stable power supply is connected.

4. With Nomad powered down, insert the CF card containing the .bin file into the mirror slot. Make sure only

one .bin file is on the card.

5. Press and hold the STAR key while turning on Nomad.

6. Once the "Preparing to burn ROM” line is displayed, you can release the STAR key.

7. After the “SUCCESS” line is displayed, cycle the power.

8. Verify that Nomad is running the version you just installed in the about nomad menu.

9. After updating the software, it is generally advised to perform a Restore to Factory Defaults.

1 2 ... 80 81 82 83 84 85 86 87 88 89 90

Pas de commentaire

Zaxcom Nomad Manuel d'utilisateur Page 85